20*2.5*4.5PP meltblown filter cartridges drinking water filter cartridge filter cartridges water filtration
|
Size
|
Diameter: 2.5″ (63 mm) 4.5″(120 mm)
|
|||
|
Length: 5″/10″/20″/30″/ 40″ etc.
|
||||
|
Filtration Area
|
Single 10″ filter element is about 0.65m²
|
|||
|
Dissolution（20℃）
|
Testing The filters without pre-washing . After 24 hours immersion in water, the dissolution was less than 30 mg/10″
filters. |
>>>pp Meltblown Filter Cartridge Melt blown filter cartridges are tubular filter cartridges made of non-toxic, odorless PP particlesafter heating, melting, spinning, drawing and forming.
Features: 1.High filtration efficiency, accurate filter rating, uniform filter cartridge pores. Up to 85%filtration efficiency. 2.Low filtration resistance, high flow, high dirt holding capacity and long service life. During theproduction process, the fiber diameter and gap are adjustable. The filter cartridge pore is smalin inner layers and large in outer layers, which enhances its flow and dirt holding capacity andmakes the filter cartridge is not easily clogged, thereby extending its service life.3.High cleanness, no pollution to water quality, great resistant to acids, bases, organic solventsand corrosion. 4.High strength. When the differential pressure between the filter inlet and outlet exceeds 0.4MPa, the filter cartridge will not deform; when the temperature is greater than 90 ·C, the filterefficiency will not be reduced. 5.lt has high hydrophilicity after PP treatment and can absorb 10 times the weight of water, so itcan be used in oil and water separation applications.
