-

Size
|
Diameter: 2.5″ (63 mm) 4.5″(120 mm)
|
|
|
|
Length: 5″/10″/20″/30″/ 40″ etc.
|
|
|
|
Filtration Area
|
Single 10″ filter element is about 0.65m²
|
|
|
|
Dissolution(20℃)
|
Testing The filters without pre-washing . After 24 hours immersion in water, the dissolution was less than 30 mg/10″
filters.
|
-

Item
|
Liquid filter bag
|
Material
|
PE, PP, Nylon(NMO), Polytetrafluoroethylene(PTFE), Support customization
|
Size
|
#1: 7” ×16” (17.78cm×40.64cm)
#2: 7” ×32”(17.78cm×81.28cm)
#3: 4” ×8.25” (10.16cm×35.56)
#4: 4” ×14” (10.16cm×35.56cm)
#5: 6” ×22” (15.24cm×55.88cm)
Customized size
|
Filtration accuracy
|
PP/PE: 0.5-300 microns
NOM: 10-1200 microns
|
-


Product name: |
pleated filter cartridge |
Media: |
PP,PES ,Nylon,PTFE |
Filter rating: |
0.1,0.22, 0.45, 1,3, 5, 10, 20, 30, 50um |
Length: |
5″, 10″, 20″, 30″, 40″ |
Outer diameter: |
φ68 mm |
Inside diameter: |
φ28 mm |
Connection type: |
215 222 226 M30 M36 |
Endotoxin: |
The water extract of the filter column is tested by IAL, and the endotoxin
content is less than 0.5 EU/ml |
-


Product name: |
Replacement 3M high flow filter cartridge |
Filter Media |
Polypropylene Pleated |
Length |
20″(508mm), 40″(1016 mm), 60″(1524mm) |
Outside Diameter |
6 inch(152mm) |
Filtration Rating |
1μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm |
Support/Drainage |
Polypropylene (PP) |
End Cap Material |
Glass fiber reinforced Polypropylene (PP) |
Center Core |
Polypropylene |
Outer Support Cage |
Polypropylene |
-


Product name: |
Pall High Flow Filter Cartridges |
Filter Media |
Polypropylene(PP) Pleated |
Length |
20″(508mm), 40″(1016mm), 60″(1524mm) |
Outside Diameter |
6 inch(152mm) |
Filtration Rating |
1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm |
Support/Drainage |
Polypropylene (PP) |
End Cap Material |
Glass fiber reinforced Polypropylene (PP) |
Seal Material |
EPDM, Buna-N, Viton, Silicone |
Outside |
Rigid Hard Cage, Stainless Steel(special) |
-


Product name: |
PARKER high flow filter cartridge |
Filter Media |
Polypropylene Pleated |
Length |
30″, 40″ |
Outside Diameter |
6 inch(152mm) |
Filtration Rating |
0.5μm, 1μm, 5μm, 10μm, 20μm |
Support/Drainage |
Polypropylene (PP) |
End Cap Material |
Polypropylene (PP), 226 O-Ring/Flat Cap with handle |
Seal Material |
EPDM, Buna-N, Viton, Silicone |
Outside |
Netting |